PWT1000
PWT1000
Reference: 589533
Sizes: 36-48
Normative: EN-ISO 20347:2012 OB+P+A+CI+WR+WRU+HRO+FO
Description:Water-resistant grain leather boots. Gore-Tex lining. Textile puncture resistant insole. SRC slip resistant rubber sole.
Upper: Hydrofugated full grain leather.
Neck Lining: Nappa leather. Foamed
Inside Lining: Gore-Tex membrane, waterproof and breathable. High abrasion resistance.
Inner Sole: Anatomic preformed with antibacterial treatment. It allows 30º washing and it is abrasion resistant.
Protective Insole: Non-metallic penetration resistant insole (High Tenacity Polyester).
Outsole: Rubber nitrile, antistatic and heat resistance.
Closing System: VELCRO® Brand closure and zipper.
HEAT RESISTANCE OF SOLE
On contact: up to 300ºC during 1 minute.
RESISTANT TO WATER PENETRATION AND ABSORPION
On the upper.
PERFORATION RESISTANCE
SLIP RESISTANCE
SRA. on tile (heel ≥0.28, plano ≥0.32). SRB on steel (heell ≥0.13, plano ≥0.18). SRC on tile and steel.
INSULATION OF SOLE AGAINST COLD
ELECTROSTATIC CHARGES
Material and structure allowing dissipation of electrostatic charges: resistance between 0.1 MW and 1.000MW.
WATER RESISTANCE
Of whole footwear.
HEAT RESISTANCE OF SOLE
On contact: up to 300ºC during 1 minute.
RESISTANT TO WATER PENETRATION AND ABSORPION
On the upper.
PERFORATION RESISTANCE
SLIP RESISTANCE
SRA. on tile (heel ≥0.28, plano ≥0.32). SRB on steel (heell ≥0.13, plano ≥0.18). SRC on tile and steel.
INSULATION OF SOLE AGAINST COLD
ELECTROSTATIC CHARGES
Material and structure allowing dissipation of electrostatic charges: resistance between 0.1 MW and 1.000MW.
WATER RESISTANCE
Of whole footwear.
